7430A REV B Norge Dryer Parts List

Search the entire 7430A REV B by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Bake element - push on terminals - 240v (bake element)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:: EAP249238

Availability:: Special Order

Price:: $140.00

Hinge (hinge, base)

Easy Part #:: EAP11750410

Availability:: In Stock

Price:: $106.59

Infinite burner switch - 8" - 240v (switch,surface unit ,large)

This switch controls the stove top surface burner.

Easy Part #:: EAP1529262

Availability:: In Stock

Price:: $78.49

Radiant element with limiter - 1200w (element)

The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimeter. If the element doesn’t have continuity you will need to replace the element. If it doesn’t have continuity it is suggested to check the element switch because it could be defective and need to be replaced. This element is 1200 watts and is a genuine OEM part. The manufacturer suggests making sure the cooking element is cooled before starting the repair. Please remember to disconnect the power to the appliance before starting the repair.

Easy Part #:: EAP1528719

Availability:: In Stock

Price:: $207.52

Seal (seal, door bottom)

This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The door seal is designed to seal the gap between the dishwasher tub and outer edge of the door. This helps to prevent leaks when your dishwasher is running. A leaking dishwasher is a good indication that the door seal is damaged. This seal is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP11755651

Availability:: In Stock

Price:: $12.80

Bake element - 3400w (element)

This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will not heat, or there is little to no heat when baking, you may need to replace the element. When replacing the element make sure to hold the wires forward so the wires do not fall back through the rear of the oven. This is a genuine OEM bake element. Please remember to disconnect the power to your range before you start your repair.

Easy Part #:: EAP1992188

Availability:: In Stock

Price:: $228.26

Vent asmy, blower (blower vent)

This part is located behind the kickplate. The blower vent assembly opens during the drying cycle to release moisture.

Easy Part #:: EAP12741853

Availability:: In Stock

Price:: $145.36

Drain pump -120v 60hz (pump assembly)

The drain pump ejects the water from the dishwasher.

Easy Part #:: EAP8689824

Availability:: In Stock

Price:: $123.87

Retaining ring (ring-retnr)

The retaining clip goes onto the end of the roller axle and holds the drum roller on to the axle. If the ring is broken or damaged, you will need to replace it. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11746909

Availability:: In Stock

Price:: $9.05

Sump (sump with seal (also order items 9 & 11))

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

Easy Part #:: EAP11755006

Availability:: In Stock

Price:: $143.48

Dual element with limiter (element)

Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W. With this element, you can adjust the size of the burner you want to use to match your pots/pans.

Easy Part #:: EAP2581859

Availability:: In Stock

Price:: $248.81

Detergent dispenser (dishwasher detergent dispenser)

Detergent dispenser W10861000 is an original equipment manufacturer (OEM) part that fits some Whirlpool, KitchenAid, Maytag and Amana dishwashers. Detergent dispenser W10861000 attaches to the inner door panel and holds the dishwasher detergent and rinse aid in covered compartments. This dishwasher detergent dispenser measures approximately 5 inches wide and 4.5 inches high.

Easy Part #:: EAP11731570

Availability:: In Stock

Price:: $181.58

Spinner kit (sprayarm, third level)

The water feed tube spinner is also called the 3rd-level spinner. It is located at the top inside the dishwasher tub. This part works like a little spray arm at the top of your dishwasher that distributes water across the top dish rack to help clean the dishes below. If your dishes are not being cleaned properly, or the spray arm is not spraying water, it could be clogged or damaged and will need to be replaced. This spinner is white in color, made of plastic and is a genuine OEM part.

Easy Part #:: EAP972316

Availability:: In Stock

Price:: $33.93

Drain pump - 120v 60 hz. (drain pump assembly)

The drain pump is what your washer uses to remove the water from the tub. The pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or has a burning smell, you may need to replace the drain pump. This pump has 120 volts, 60 hz and is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow.

Easy Part #:: EAP7783938

Availability:: In Stock

Price:: $190.25

Moisture sensor (sensor, electrode)

This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is done, you may need to replace the sensor. You will find the moisture sensor behind the lint screen. Be sure to disconnect the power source from the dryer before you begin this repair. Note: Some model's require two sensors, please order quantity needed. Sensor only, harness is not included. This part is sold individually.